Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Door Panel and Speaker on a Mazda 6

Model: Mazda 6 MK 2, GH - Years: 2008, 2009, 2010, 2011, 2012
Part: Speaker

See other generations:
Video tutorial

In this video, we will see how to remove the door panel and speaker from a Mazda 6: start by removing the panel corresponding to the external electric mirror, which is held in place by clips, and disconnect the electrical connectors and the tweeter.

Next, remove the cover over the bolt located near the internal door lock so that you can unscrew it. Do the same for the handle, then you can begin to pry from the bottom of the plastic panel, which is held only by pressure clips.

Gently pull it towards you, and when it is completely out, disconnect all the electrical connectors. Now, remove the speaker by unscrewing the screws that hold it in place on four sides.

Also, disconnect the electrical connector, and the job is complete.


Updated on 18 September 2026 by ScegliAuto


Related tutorials

How to Remove the Door Panel on a Mazda 6
Mazda 6 (2002-2008 / GG, MK 1) Replace the door panel on a Mazda 6 if it is irreparably damaged. Here’s how to do it. Using a screwdriver, unscrew the screws located in the upper l…
Replacing Mirror on Mazda 6
Mazda 6 (2012-2024 / GJ, MK 3) Is the mirror on your Mazda 6 in need of replacement? Here's how to remove it. Dismantle the door panel to access the mounting screws. Use a lever to…
How to Remove the Speaker from Your Car
How to Remove the Speaker from Your Car
Mazda 6 (2002-2008 / GG, MK 1) Start by removing the plastic cover of the mirror by gently pulling it off to release it, and disconnect the connectors. Then lift the section of the…

Other guides you may be interested in

How to Open the Fuel Filler Flap in the Hyundai i30?

In this tutorial, you will learn how to open the fuel filler flap in the Hyundai i30, a very simple operation that follows the typical procedure of most vehicles. First, unlock the locks using the designated button on the remote, then open the driver's door, locate the release lever on the left side of the seat, and operate it. Next, move to the fuel filler flap, open it completely, unscrew the cap, and refuel as needed. To close the flap, simply press it gently.

Watch the video!


by ScegliAuto

More videos