Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Door Panel on a Mazda 6

Model: Mazda 6 GG, MK 1 - Years 2002-2008
Part: Door trim panel

Replace the door panel on a Mazda 6 if it is irreparably damaged. Here’s how to do it. Using a screwdriver, unscrew the screws located in the upper lever space of the door opening and the screws present in the handle. Remove the trim plastic near the window (opposite the wing mirror). Unscrew the remaining screws on the door panel and detach the securing clips. Remove the panel by hand and disconnect it from the door (unplug the power wiring and the opening cable). Fit the new panel and tighten all the screws.

Updated on 17 March 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

How to Remove a Door Handle on a Mazda 6
How to Remove a Door Handle on a Mazda 6
Mazda 6 (2002-2008 / GG, MK 1) In this guide, you will see how simple it is to remove the external handle on a Mazda 6 door. To start, take a plastic spatula and remove the switch …
Removing the Front Door Panel on Mazda 6 MK2
Removing the Front Door Panel on Mazda 6 MK2
Mazda 6 (2008-2012 / GH, MK 2) This video shows how to remove the front passenger door panel on a second-generation Mazda 6 in simple steps. First, open the front door and get a ve…
How to Remove the Door Panel on Mazda 6
Mazda 6 (2002-2008 / GG, MK 1) How to remove the front passenger door panel on a Mazda 6. Follow these steps. Before starting the disassembly, disconnect the battery terminals loca…

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos