Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Door Panel on Mazda 6

Model: Mazda 6 GG, MK 1 - Years 2002-2008
Part: Door trim panel

How to remove the front passenger door panel on a Mazda 6. Follow these steps. Before starting the disassembly, disconnect the battery terminals located in the engine bay. Begin the disassembly: use a lever to remove the plastic around the door opening lever, then the plastic on the door handle. Use a screwdriver to unscrew the securing screws underneath (if present). Detach the plastic clips that secure the door. Remove the door panel by hand, disconnect the power connectors and the door release cable.

Updated on 1 March 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

How to Remove the Door Panel on a Mazda 6
Mazda 6 (2002-2008 / GG, MK 1) Replace the door panel on a Mazda 6 if it is irreparably damaged. Here’s how to do it. Using a screwdriver, unscrew the screws located in the upper l…
How to Replace the Window Regulator Motor on the Mazda 6
How to Replace the Window Regulator Motor on the Mazda 6
Mazda 6 (2002-2008 / GG, MK 1) In this video, follow the main instructions to remove and replace the window regulator motor on the first series Mazda 6 in simple steps. First, open…
Replace the Door Lock on the Mazda 6
Replace the Door Lock on the Mazda 6
Mazda 6 (2002-2008 / GG, MK 1) To replace the door lock on the Mazda 6, proceed as follows: 1) Disconnect the battery. 2) Remove the entire door panel, taking care not to damage th…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos