Do it yourself
Frequently asked questions about cars and motorcycles

Removing the Front Door Panel on Mazda 6 MK2

Model: Mazda 6 GH, MK 2 - Years 2008-2012
Part: Door trim panel

This video shows how to remove the front passenger door panel on a second-generation Mazda 6 in simple steps. First, open the front door and get a very thin plastic lever. Then, remove the covers or plastic caps on the panel, unscrewing all the fixing screws underneath. Next, remove the triangular plastic cover by disconnecting the cable at the back. Start prying at the sides to detach the door panel, disconnecting the electrical connector and the handle cable!

Updated on 17 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Mazda 6 (2002-2008 / GG, MK 1) How to remove the front passenger door panel on a Mazda 6. Follow these steps. Before starting the disassembly, disconnect the battery terminals loca…
Mazda 6 (2002-2008 / GG, MK 1) To replace the door lock on the Mazda 6, proceed as follows: 1) Disconnect the battery. 2) Remove the entire door panel, taking care not to damage th…
Mazda 6 (2008-2012 / GH, MK 2) To change the front bulbs on a Mazda 6, start by unscrewing the screws present in the wheel arch on the side of the affected headlamp. Then move to t…

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos