Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mazda
    3. :
  3. Mazda 6
    4. : Engine oil

Mazda 6 - Engine oil

Engine Oil Mazda 6 (2008-2012 / gh, mk 2)

Mazda 6 (2002-2008 / GG, MK 1)
How to Change Engine Oil
In the following video, you will see what is necessary to change the oil in a car. First, open the bonnet and remove the cap to check what type of oil is most …Read all…
Posted on 7 March 2026 by ScegliAuto
Mazda 6 (2002-2008 / GG, MK 1)
Replacement of Engine Oil and Oil Filter
Lift the car and secure it with suitable supports so that it cannot fall. The necessary tools are a ratchet spanner, a set of fixed spanners, a special tool …Read all…
Posted on 10 February 2026 by ScegliAuto
Mazda 6 (2008-2012 / GH, MK 2)
Engine Oil and Oil Filter Replacement
Lift the car and secure it. The necessary tools are a ratchet spanner, a set of fixed spanners, a special tool for removing the filter, and a large container …Read all…
Posted on 10 February 2026 by ScegliAuto
Mazda 6 (2002-2008 / GG, MK 1)
Engine Oil and Oil Filter Replacement
Lift the vehicle on suitable axle stands or ramps, remove the plastic undertray, and locate the drain plug of the oil sump (found at the rear): position a …Read all…
Posted on 10 February 2026 by ScegliAuto
Mazda 6 (2002-2008 / GG, MK 1)
Engine Oil and Oil Filter Replacement
Lift the vehicle on a hydraulic lift or position it on suitable car ramps (it is recommended to carry out the oil and filter replacement when the engine is …Read all…
Posted on 5 February 2026 by ScegliAuto

Engine Oil Mazda 6 (2002-2008 / gg, mk 1)

Mazda 6 (2002-2008 / GG, MK 1)
How to Change Engine Oil
In the following video, you will see what is necessary to change the oil in a car. First, open the bonnet and remove the cap to check what type of oil is most …Read all…
Posted on 7 March 2026 by ScegliAuto
Mazda 6 (2002-2008 / GG, MK 1)
Replacement of Engine Oil and Oil Filter
Lift the car and secure it with suitable supports so that it cannot fall. The necessary tools are a ratchet spanner, a set of fixed spanners, a special tool …Read all…
Posted on 10 February 2026 by ScegliAuto
Mazda 6 (2008-2012 / GH, MK 2)
Engine Oil and Oil Filter Replacement
Lift the car and secure it. The necessary tools are a ratchet spanner, a set of fixed spanners, a special tool for removing the filter, and a large container …Read all…
Posted on 10 February 2026 by ScegliAuto
Mazda 6 (2002-2008 / GG, MK 1)
Engine Oil and Oil Filter Replacement
Lift the vehicle on suitable axle stands or ramps, remove the plastic undertray, and locate the drain plug of the oil sump (found at the rear): position a …Read all…
Posted on 10 February 2026 by ScegliAuto
Mazda 6 (2002-2008 / GG, MK 1)
Engine Oil and Oil Filter Replacement
Lift the vehicle on a hydraulic lift or position it on suitable car ramps (it is recommended to carry out the oil and filter replacement when the engine is …Read all…
Posted on 5 February 2026 by ScegliAuto
Airbag (2) Alternator (1) Speaker (4) Shocks (5) Air conditioning (1) Car stereo (6) Battery (4) Ignition coil (1) Air vents (1) Control arm (12) Transmission (1) Spark plugs (7) Body (2) Glove compartment (1) Key (18) Trunk lock (1) Timing belt (6) V-belt (2) Onboard computer (2) Checks and maintenance (5) Throttle body (1) Dashboard (3) Bearing (5) Brake rotors (5) Headlight (4) Tail light (1) Diesel particulate filter (1) Air filter (1) Cabin air filter (12) Fuel filter (1) Diesel fuel filter (2) Oil filter (1) Grille (3) Fuel injectors (1) Window switch (1) Accessory kit (9) Light bulb (3) Side marker bulb (2) Headlight bulb (8) Interior dome light bulb (3) Handle (2) Engine (2) Power window motor (2) Starter motor (1) Engine oil (5) Clock (5) Door trim panel (4) Front bumper (3) Rear bumper (3) Brake pads (4) Hydraulic pistons (1) Tires (2) Pump (2) Fuel pump (1) Instrument cluster (1) Radiator (1) Wheel (4) Fuse box (20) Axle shaft (1) Door lock (1) Oxygen sensor (1) Side mirror (4) Rearview mirror (1) Warning light – error code (13) (13) Tire pressure warning light (2) Service warning light (44) Windshield wipers (3) Thermostat (3) Cylinder head (1) Windshield washer nozzle (1) Valve (3) EGR valve (1) Blower motor (1) Steering wheel (2)

How to Remove the Headrests from a Fiat Panda

Below are the instructions to remove the headrests, both front and rear, from the Fiat Panda. First, get inside the vehicle and press and hold the side button located at the base of the headrest. Then, while holding the button, pull the headrest upwards to remove it, as shown in the video. At this point, perform the same operation on the other headrests. Now, simply insert them back in while holding the button, and finally adjust the height of all the headrests!

Watch the video!


by ScegliAuto

More videos