Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change Engine Oil

Model: Mazda 6 GG, MK 1 - Years 2002-2008
Part: Engine oil

In the following video, you will see what is necessary to change the oil in a car. First, open the bonnet and remove the cap to check what type of oil is most suitable to use. Next, lift the car onto a ramp and unscrew the plugs from the container that holds the old oil, which you will drain into another container. Clean the plugs and replace their seals and the filter. Also, clean the oil outlet pipe and screw it back in tightly. At this point, lower the car and, using a funnel, pour in the new oil. Finally, use a dipstick to check that the reservoir is filled correctly.

Updated on 23 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Oil Light on the Mazda 6
How to Reset the Oil Light on the Mazda 6
Mazda 6 (2012-2024 / GJ, MK 3) Resetting the oil light on the Mazda 6 is a very straightforward operation that can be done independently. Once inside the vehicle, switch on the ins…
How to Reset the Oil Life on a Mazda 6
How to Reset the Oil Life on a Mazda 6
Mazda 6 (2012-2024 / GJ, MK 3) To reset the oil life on a Mazda 6, start by turning on the ignition and the engine. Using the central dial, turn it to the left until you reach "app…
How to Reset the Oil Change Light on a Mazda 6
How to Reset the Oil Change Light on a Mazda 6
Mazda 6 (2012-2024 / GJ, MK 3) This video tutorial shows how to reset the maintenance and oil change light on a 2020 Mazda 6. The procedure is very simple. First, start the instrum…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos