Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mazda
    3. :
  3. Mazda 6
    4. : Tail light

Mazda 6 - Tail light

Tail Light Mazda 6 (2002-2008 / gg, mk 1)

Mazda 6 (2002-2008 / GG, MK 1)
How to Remove and Refit the Rear Light on a Mazda 6
Unsure how to remove the rear light from your car? Let's see how to do it in this video. Open the boot by inserting the key into the lock. As with most cars, …Read all…
Posted on 9 March 2026 by ScegliAuto
Airbag (2) Alternator (1) Speaker (4) Shocks (5) Air conditioning (1) Car stereo (6) Battery (4) Ignition coil (1) Air vents (1) Control arm (12) Transmission (1) Spark plugs (7) Body (2) Glove compartment (1) Key (18) Trunk lock (1) Timing belt (6) V-belt (2) Onboard computer (2) Checks and maintenance (5) Throttle body (1) Dashboard (3) Bearing (5) Brake rotors (5) Headlight (4) Tail light (1) Diesel particulate filter (1) Air filter (1) Cabin air filter (12) Fuel filter (1) Diesel fuel filter (2) Oil filter (1) Grille (3) Fuel injectors (1) Window switch (1) Accessory kit (9) Light bulb (3) Side marker bulb (2) Headlight bulb (8) Interior dome light bulb (3) Handle (2) Engine (2) Power window motor (2) Starter motor (1) Engine oil (5) Clock (5) Door trim panel (4) Front bumper (3) Rear bumper (3) Brake pads (4) Hydraulic pistons (1) Tires (2) Pump (2) Fuel pump (1) Instrument cluster (1) Radiator (1) Wheel (4) Fuse box (20) Axle shaft (1) Door lock (1) Oxygen sensor (1) Side mirror (4) Rearview mirror (1) Warning light – error code (13) (13) Tire pressure warning light (2) Service warning light (44) Windshield wipers (3) Thermostat (3) Cylinder head (1) Windshield washer nozzle (1) Valve (3) EGR valve (1) Blower motor (1) Steering wheel (2)

How to Remove the Headrests from a Fiat Panda

Below are the instructions to remove the headrests, both front and rear, from the Fiat Panda. First, get inside the vehicle and press and hold the side button located at the base of the headrest. Then, while holding the button, pull the headrest upwards to remove it, as shown in the video. At this point, perform the same operation on the other headrests. Now, simply insert them back in while holding the button, and finally adjust the height of all the headrests!

Watch the video!


by ScegliAuto

More videos