Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove and Refit the Rear Light on a Mazda 6

Model: Mazda 6 GG, MK 1 - Years: 2002, 2003, 2004, 2005, 2006, 2007, 2008
Part: Tail light

See other generations:
Video tutorial

Unsure how to remove the rear light from your car? Let's see how to do it in this video. Open the boot by inserting the key into the lock.

As with most cars, you need to access behind the boot lining. Disconnect all the power connectors for the lights and unscrew the nuts securing the light's pins.

Now that the rear light is removed, compare it with the new one. If it matches the old one, you can fit it. Start by connecting the light connectors to the rear light and insert it into the boot's metalwork. Once done, screw the nuts to secure the light.

Finally, close the inspection hatch with the lining and check the correct operation.


Updated on 25 February 2026 by ScegliAuto


Related tutorials

How to Remove the Rear Bumper on a Mazda 6
How to Remove the Rear Bumper on a Mazda 6
Mazda 6 (2008-2012 / MK 2, GH) The following steps will guide you in removing and replacing the rear bumper on a Mazda 6. First, open the boot lid and start unscrewing and removing…
How to Remove the Rear Bumper on a Mazda 6?
How to Remove the Rear Bumper on a Mazda 6?
Mazda 6 (2008-2012 / MK 2, GH) In this tutorial, you will see how to remove the rear bumper on a Mazda 6, a very simple and quick operation. First, open the boot, then remove the c…
How to Remove and Install the Sensor on a Mazda 6
How to Remove and Install the Sensor on a Mazda 6
Mazda 6 (2002-2008 / GG, MK 1) This video guide shows you how to maintain your Mazda 6. Pull the lever located at the bottom left of the driver’s side dashboard, lift the bonnet un…

How to Reset the Tyre Pressure Warning Light on the Jeep Renegade?

To reset the tyre pressure warning light on the Jeep Renegade, inflate the tyres until they reach the recommended pressure: this value is indicated on the sticker attached to the driver’s door pillar. Once the tyres are properly inflated, navigate through the menu that appears on the instrument cluster until you find the tyre pressure option. At this point, press and hold the OK button on the right side of the steering wheel to make the warning light disappear.

Watch the video!


by ScegliAuto

More videos