Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mazda
    3. :
  3. Mazda 6
    4. : Spark plugs

Mazda 6 - Spark plugs

Mazda 6 (2002-2008 / MK 1, GG)
How to replace spark plugs on a Mazda 6
Before we begin, we will have to open the front hood of our Mazda 6. So let's start by disassembling and removing the air filter block, unscrewing the fixing …read all…
Posted on 22 February 2024 by ScegliAuto
Mazda 6 (2002-2008 / MK 1, GG)
How to replace spark plugs on a Mazda 6
How to change the spark plugs of our Mazda 6. We detach the coil clamps as in the video, with a twist movement we detach all the coils of the car. Once …read all…
Posted on 28 September 2023 by ScegliAuto
Mazda 6 (2002-2008 / MK 1, GG)
How to replace the spark plugs in the car
Replacing the spark plugs is something you can do yourself if you have good dexterity. The wear of the spark plugs can lead to problems such as: smoke in the …read all…
Posted on 24 July 2023 by ScegliAuto
Mazda 6 (2008-2012 / GH, MK 2)
Replace spark plugs and ignition coils
For safety, disconnect the negative pole of the battery. Gently remove the plastic cover protecting the motor by simply lifting it upwards. In order not to …read all…
Posted on 18 July 2023 by ScegliAuto
Mazda 6 (2002-2008 / MK 1, GG)
Replace the spark plugs on the engine
Gently remove the plastic cover protecting the motor by simply lifting it upwards. To work safely disconnect the negative pole of the battery. In order not to …read all…
Posted on 13 July 2023 by ScegliAuto
Mazda 6 (2002-2008 / MK 1, GG)
Replace the spark plugs on the engine
For safety, disconnect the negative pole of the battery. Gently remove the plastic cover protecting the motor by simply lifting it upwards. In order not to …read all…
Posted on 13 July 2023 by ScegliAuto
Mazda 6 (2002-2008 / MK 1, GG)
Replacing the engine spark plugs
Disconnect the negative pole of the battery. Gently remove the plastic cover protecting the motor by simply lifting it upwards. In order not to confuse the …read all…
Posted on 25 June 2023 by ScegliAuto
Airbags (2) Alternator (1) Loudspeaker (4) Shock absorbers (5) Air conditioning (1) Car stereo (5) Battery (7) Coil (1) Air Vents (1) Arm (12) Gearbox (1) Spark plugs (7) Bodywork (1) Key (8) Locking the trunk (1) Timing belt (5) V-belt (1) -board computer (1) Checks and maintenance (22) Throttle body (1) Dashboard (3) Bearing (5) Brake discs (5) Headlight (3) Tail light (1) Air filter (1) Cabin air filter (10) Diesel filter (2) Oil filter (1) Grille (3) Injectors (1) Window lift switch (1) Accessory Kit (9) Light bulb (3) Side turn signal light bulb (2) Headlight bulb (8) Interior lights ceiling light bulb (2) Handle (2) Engine (2) Window motor (2) Starter motor (1) Engine oil (6) Door panel (4) Front bumper (3) Rear bumper (3) Brake pads (3) Hydraulic pistons (2) Tires (2) Pump (1) Fuel pump (1) Instrument cluster (3) Radiator (1) Wheel (4) Fuse box (4) Drive shaft (1) Lock (1) Lambda sensor (1) Outside rearview mirror (3) Interior rearview mirror (1) Windscreen wipers (3) Thermostat (3) Engine head (1) Windshield washer nozzle (1) Valve (3) EGR valve (1) Interior blower (1) Steering wheel (2)

How do you adjust the clutch cable on the Kia Picanto?

To be able to adjust the clutch cable of the Kia Picanto you need to open the hood so that you have access to the components inside the engine compartment: in order to reach the cable you will need to remove some components on the right side, such as the battery and the air filter. Below them you will find the clutch cable, which will have to be adjusted by screwing or loosening the bolt placed at the end of the cable. This will make the pedal harder or softer; after the adjustment, it will be possible to assemble all the components by closing the hood.

Watch the video!


by ScegliAuto

More videos