Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Mazda
  4. :
  5. 6
  6. : How to replace spark plugs on a Mazda 6

Mazda 6 - Video tutorial

Model: Mazda 6 MK 1, GG - Years 2002-2008
Part: Spark plugs
Operation: How to replace spark plugs on a Mazda 6

Before we begin, we will have to open the front hood of our Mazda 6. So let's start by disassembling and removing the air filter block, unscrewing the fixing screws and disconnecting the various sleeves and electrical plugs. Next we will have to unscrew the fixing bolts of the pins connected to the spark plugs, and then disconnect the pins themselves. Once we have removed the pins, we will have reached the spark plugs. At this point, we will have to unscrew and remove them, and the disassembly will be completed. To fit the new spark plugs, we will have to follow these instructions in reverse, and the replacement will be complete.


Posted on 22 February 2024 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos