Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Mazda
  4. :
  5. 6
  6. : How to replace spark plugs on a Mazda 6

Mazda 6 - Video tutorial

Model: Mazda 6 MK 1, GG - Years 2002-2008
Part: Spark plugs
Operation: How to replace spark plugs on a Mazda 6

How to change the spark plugs of our Mazda 6. We detach the coil clamps as in the video, with a twist movement we detach all the coils of the car. Once extracted, with a socket wrench we unscrew the candles as in the video. We compare the worn spark plugs with the new ones, to verify the exact copy of the one to be replaced. With a coin or piece of metal we go to widen the tongue of the spark plug, then, having made this modification on all the spark plugs, we go to reassemble them in the engine head, remembering to screw them gently so as not to damage the thread. We reassemble the coils and terminals of the power supply.


Posted on 28 September 2023 by ScegliAuto

Other guides that may interest you

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos