Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Engine Spark Plugs

Model: Mazda 6 GG, MK 1 - Years 2002-2008
Part: Spark plugs

Disconnect the negative terminal of the battery. Gently remove the plastic cover protecting the engine by lifting it upwards. To avoid confusion with the cables, disconnect only the first spark plug. Using a 10 mm socket spanner, unscrew the retaining nut of the first spark plug and pull the lead upwards. The first spark plug is located at the bottom of the well. Before proceeding with removal, thoroughly clean the wells with compressed air to eliminate any dirt that could fall into the combustion chamber. Using the appropriate spark plug tool, which has a rubber gripping device, gently insert it onto the spark plug head and unscrew it. Be careful not to drop any foreign objects into the well. Replace the spark plug with one of the same model, carefully inserting it into the well, always using the appropriate tool, and turn it gently, ensuring it screws in correctly. If you encounter resistance, remove it and try again. Spark plugs should be tightened with a torque wrench; if you do not have one, tighten without overdoing it. Repeat the same operation for the other spark plugs.

Updated on 2 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Spark Plugs on a Mazda 6
How to Replace the Spark Plugs on a Mazda 6
Mazda 6 (2002-2008 / GG, MK 1) To change the spark plugs on your Mazda 6, disconnect the coil connectors as shown in the video. Twist to remove all coils from the car. Once extract…
Replacement and Maintenance of Engine Cylinder Head
Replacement and Maintenance of Engine Cylinder Head
Mazda 6 (2002-2008 / GG, MK 1) Open and lift the bonnet. Now, remove the upper engine cover and proceed to disconnect the connectors attached to the spark plugs. Next, remove the b…
How to Replace the Spark Plugs on a Mazda 6
How to Replace the Spark Plugs on a Mazda 6
Mazda 6 (2002-2008 / GG, MK 1) Before starting, open the bonnet of your Mazda 6. Begin by removing the air filter housing, unscrewing the fixing screws, and disconnecting the vario…

Other guides you may be interested in

How to Lower the Rear Seats of a Citroen C4 Grand Picasso

In this video, we see how to lower the seats of the Citroen C4 Grand Picasso: the first thing to do is remove the parcel shelf and lower the load floor. Pull down the red straps that allow you to lower the two rear seats, which we cover with the expandable load floor. Now, go to the second row and take the black strap to push the first seat forward and fold it onto itself. At the back of this, there is a panel continuing from the load area. Do the same with the centre seat and then move to the other side to complete the operation with the last seat. The reverse operation is very simple to put all the seats back in place.

Watch the video!


by ScegliAuto

More videos