Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Radio from a 2007 Mazda 6 and Replace it with a Touchscreen Stereo

Model: Mazda 6 GG, MK 1 - Years: 2002, 2003, 2004, 2005, 2006, 2007, 2008
Part: Car stereo

See other generations:
Video tutorial

To replace the radio with a touchscreen stereo in a 2007 Mazda 6, follow these steps. First, remove the entire plastic surround around the handbrake, gear lever, and dashboard.

This will give access to the screws that secure the radio unit. After unscrewing the front screws, carefully remove the glove compartment and take out the side screw.

At this point, disconnect all the connectors and remove the unit. Once the unit is removed, disassemble it piece by piece and, as shown in the video, refit the pieces into the new housing provided with the touchscreen stereo.

Once connected and powered correctly, secure the screen in place of the radio and proceed to reassemble the plastic surround.


Posted on 6 May 2026 by ScegliAuto


Related tutorials

Mazda 6 (2006) Fuse Diagram
Mazda 6 (2006) Fuse Diagram
Mazda 6 (2002-2008 / GG, MK 1) This video shows the fuse diagram for the 2006 Mazda 6, including the relevant power ratings. It also displays the location of the two fuse boxes in …
How to Reset Electric Windows on a Mazda 6
How to Reset Electric Windows on a Mazda 6
Mazda 6 (2002-2008 / GG, MK 1) Today, you will see how to reset the automatic closure of the windows on a Mazda 6, first series model produced from 2002 to 2008, thanks to this ver…
How do you program the key for the Mazda 6?
How do you program the key for the Mazda 6?
Mazda 6 (2008-2012 / MK 2, GH) To program the key of the Mazda 6, you need to insert it into the ignition switch: while it is inserted, you must connect a diagnostic tool to the OB…

How to Open the Fuel Filler Flap in the Hyundai i30?

In this tutorial, you will learn how to open the fuel filler flap in the Hyundai i30, a very simple operation that follows the typical procedure of most vehicles. First, unlock the locks using the designated button on the remote, then open the driver's door, locate the release lever on the left side of the seat, and operate it. Next, move to the fuel filler flap, open it completely, unscrew the cap, and refuel as needed. To close the flap, simply press it gently.

Watch the video!


by ScegliAuto

More videos