Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset Electric Windows on a Mazda 6

Model: Mazda 6 GG, MK 1 - Years 2002-2008
Part: Warning light – error code

Today, you will see how to reset the automatic closure of the windows on a Mazda 6, first series model produced from 2002 to 2008, thanks to this very simple video tutorial. The operation is very easy to perform; simply lower the window by a few centimetres and then raise it completely while continuing to hold the button until you hear a "click" from inside the door. Perform this operation on all the electric windows of the vehicle, starting from the driver's front side to the passenger's front side as shown in the video.

Updated on 14 September 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Window Switch Assembly on a Mazda 6
Replacing the Window Switch Assembly on a Mazda 6
Mazda 6 (2002-2008 / GG, MK 1) To replace the window switch assembly on the Mazda 6, proceed as follows: 1) Disconnect the battery. 2) Using a plastic trim tool, lever off the trim…
How to replace the motor of the external rearview mirror of the Mazda 6
How to replace the motor of the external rearview mirror of the Mazda 6
Mazda 6 (2012-2024 / GJ, MK 3) In a few steps, we will see the process of disassembling and replacing the motor of the external rearview mirror adjustment of the Mazda 6. First, we…
How to Locate the Fuses and Understand Their Diagrams in a Mazda 6
How to Locate the Fuses and Understand Their Diagrams in a Mazda 6
Mazda 6 (2012-2024 / GJ, MK 3) The first fuse panel you can locate in a Mazda 6 is inside the vehicle, positioned behind the plastic cover at the bottom left on the driver's side. …

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos