Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Tyre Pressure on a Mazda 6

Model: Mazda 6 GJ, MK 3 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023
Part: Checks and maintenance

See other generations:
Video tutorial

Today, we will go through the entire procedure to reset the tyre pressure quickly and easily on a Mazda 6, third generation model produced from 2012 to 2023. First, turn on the instrument panel without starting the engine. Next, press and hold the reset button "SET" located on the control panel to the right of the steering wheel, and keep it pressed until the second beep sounds to start the tyre pressure reset.

Before starting this procedure, it is important to check the correct pressure of all four tyres as indicated by the manufacturer.


Updated on 25 October 2026 by ScegliAuto


Related tutorials

How to Reset the Tyre Pressure Warning Light on a Mazda 6
How to Reset the Tyre Pressure Warning Light on a Mazda 6
Mazda 6 (2012-2024 / GJ, MK 3) This guide briefly outlines the necessary instructions to reset the tyre pressure warning light on a Mazda 6; before performing the reset, ensure all…
Resetting the Tyre Pressure Warning Light on a Mazda 6
Resetting the Tyre Pressure Warning Light on a Mazda 6
Mazda 6 (2012-2024 / GJ, MK 3) Follow today's instructions to reset the tyre pressure warning light (TPMS) on the Mazda 6; before performing the reset, ensure that all four tyres a…
How to reset the tyre warning light on a Mazda 6?
How to reset the tyre warning light on a Mazda 6?
Mazda 6 (2012-2024 / GJ, MK 3) Resetting the tyre warning light on a Mazda 6 is a simple and quick operation. First, ensure the correct tyre pressure is restored according to the i…

Other guides you may be interested in

How to enter the radio code in the Opel Zafira?

In the Opel Zafira, it may happen that the radio locks and consequently requests the appropriate security code, especially after disconnecting or replacing the battery. The code can be found in the documents provided at purchase or through one of the various online recovery services. Once obtained, enter it by following the procedure shown in this tutorial. First, switch on the instrument panel, then press and hold both the "AS" button and the left knob for about 5 seconds. Next, enter the first digit by repeatedly pressing the "1" button, continue with the next 3 buttons, and save the setting by pressing the "AS" button again.

Watch the video!


by ScegliAuto

More videos