Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Auxiliary Belt in the Mazda 6?

Model: Mazda 6 GJ, MK 3 - Years 2012-2024
Part: V-belt

In this tutorial, you will see how to replace the auxiliary belt in the Mazda 6, a very simple and quick operation. First, ensure that the engine is completely cold, then lift the right side of the vehicle and remove both the wheel and the inner wheel arch cover. Next, grasp the tensioner with a 17 mm socket spanner, loosen the tension by moving it outward, and remove the old belt. Now, in the same way, position the replacement following the diagram and reassemble everything in reverse order.

Posted on 6 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Timing Chain on a Mazda 6 2.3L
How to Replace the Timing Chain on a Mazda 6 2.3L
Mazda 6 (2002-2008 / GG, MK 1) In this guide, you will find the main instructions on how to remove and replace the timing chain on a Mazda 6 2.3L. First, open the car's bonnet and …
How to Replace the Front Bumper on the Mazda 6?
How to Replace the Front Bumper on the Mazda 6?
Mazda 6 (2002-2008 / GG, MK 1) In this tutorial, you will see how to replace the front bumper on the Mazda 6, a very simple and quick operation. First, open the bonnet, then using …
How to Replace the Headlights on a Mazda 6
How to Replace the Headlights on a Mazda 6
Mazda 6 (2012-2024 / GJ, MK 3) In this tutorial, we will see how to replace the headlights on a Mazda 6, a very simple and quick operation. First, position the vehicle in front of …

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos