Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mazda
    3. :
  3. 6
    4. : V-belt replacement

Mazda 6 - Video tutorial

Model: Mazda 6 GG, MK 1 - Years 2002-2008
Part: V-belt
Operation: V-belt replacement

The following video tutorial shows the procedure for removing and replacing a worn V-belt from a Mazda 6. To gain better access to the belt, the inner wheel cover must be removed. Take a Phillips screwdriver and remove three small screws holding the panel and pull it out. Now, with a 15 mm wrench, loosen the tension of the belt by acting on the nut positioned in the center of the pulley. In this way it will be possible to extract the worn belt. Using the same principle, it is also possible to replace the timing belt.


Posted on 30 July 2023 by ScegliAuto



Timing belt replacement
Mazda 6 (2002-2008 / GG, MK 1) This video shows us how to replace the timing belt. First we remove the plastics from the underbody, then we remove the belt tensioner with a 14mm wr
How to remove the belt and tensioner roller on a Mazda 6
Mazda 6 (2002-2008 / GG, MK 1) Should the belt in your car be replaced? We see in this detailed video how to remove and replace the belt and the tensioner roller on a Mazda 6. We l
Replace timing belt on Mazda 6
Mazda 6 (2002-2008 / GG, MK 1) Let's see how to remove and replace the timing belt on Mazda 6. We lift the car on a column bridge (if necessary, we remove the front wheel with a sc

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos