Do it yourself
Frequently asked questions about cars and motorcycles

Replacing the Timing Belt on a Mazda 6

Model: Mazda 6 MK 2, GH - Years: 2008, 2009, 2010, 2011, 2012
Part: Timing belt

See other generations:
Video tutorial

Today's guide will show you how to remove and replace the timing belt on a Mazda 6, following the instructions below. First, open the bonnet and start unscrewing the fixing screws of the timing cover; lift the vehicle and remove the front right wheel and the wheel arch liner, then remove the crankshaft pulley as shown in the video.

At this point, take the necessary references for the removal and replacement of the timing belt, installing the original one, and follow the video tutorial to the end!


Updated on 13 August 2026 by ScegliAuto


Related tutorials

Mazda 6 (2002-2008 / GG, MK 1) This video tutorial shows the procedure to remove and replace the worn V-belt of a Mazda 6. To gain better access to the belt, you need to remove the…
Mazda 6 (2002-2008 / GG, MK 1) In this guide, you will find the main instructions on how to remove and replace the timing chain on a Mazda 6 2.3L. First, open the car's bonnet and …
Mazda 6 (2002-2008 / GG, MK 1) This video shows how to replace the timing belt. First, remove the underbody plastic covers, then take off the tensioner using a 14mm spanner. Next, …

How to Open the Fuel Flap on a Volkswagen Tiguan?

To open the fuel flap on a Volkswagen Tiguan, first unlock the car using the appropriate button on the remote. This will open the car and unlock the mechanism that controls the fuel flap. At this point, apply light pressure to the left side of the flap to open it and access the cap underneath. Once this is unscrewed, you can refuel and then close everything.

Watch the video!


by ScegliAuto

More videos