Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Timing Belt and Tensioner Pulley on a Mazda 6

Model: Mazda 6 GG, MK 1 - Years 2002-2008
Part: Timing belt

Does your car's belt need replacing? In this detailed video, see how to remove and replace the timing belt and tensioner pulley on a Mazda 6. Lift the bonnet and secure it, then remove the belt by loosening the tensioner. Use a socket spanner to remove the plate on the right side of the engine, then use a spanner to unscrew the tensioner pulley and slide it out of its seat. Fit the new tensioner and the belt, tightening everything with the spanner. Finally, refit the securing pins for the plate and close the bonnet.

Updated on 25 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Timing Belt Replacement
Timing Belt Replacement
Mazda 6 (2002-2008 / GG, MK 1) This video shows how to replace the timing belt. First, remove the underbody plastic covers, then take off the tensioner using a 14mm spanner. Next, …
How to Replace the Timing Belt on Mazda 6
How to Replace the Timing Belt on Mazda 6
Mazda 6 (2002-2008 / GG, MK 1) Learn how to remove and replace the timing belt on Mazda 6. Lift the car on a column lift (if necessary, remove the front wheel using a screwdriver t…
Replacing the Timing Belt on a Mazda 6
Replacing the Timing Belt on a Mazda 6
Mazda 6 (2008-2012 / GH, MK 2) Today's guide will show you how to remove and replace the timing belt on a Mazda 6, following the instructions below. First, open the bonnet and star…

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos