Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Timing Belt on Mazda 6

Model: Mazda 6 GG, MK 1 - Years: 2002, 2003, 2004, 2005, 2006, 2007, 2008
Part: Timing belt

See other generations:
Video tutorial

Learn how to remove and replace the timing belt on Mazda 6. Lift the car on a column lift (if necessary, remove the front wheel using a screwdriver to take off the right wheel arch liner). Remove the cover (plastic or metal), use a spanner to loosen the tensioner pulley and slide the belt off its seat.

Using a socket wrench, unscrew the tightening bolt of the tensioner pulley, and remove the water pump as shown in the video. Fit the new water pump, the tensioner, and the belt itself, tightening everything with the socket wrench.

Finally, refit the rivets along with the wheel arch liner and remount the wheel with the tyre on the vehicle.


Updated on 7 March 2026 by ScegliAuto


Related tutorials

Replacing the Timing Belt on a Mazda 6
Replacing the Timing Belt on a Mazda 6
Mazda 6 (2008-2012 / MK 2, GH) Today's guide will show you how to remove and replace the timing belt on a Mazda 6, following the instructions below. First, open the bonnet and star…
Replacement of the V-belt
Replacement of the V-belt
Mazda 6 (2002-2008 / GG, MK 1) This video tutorial shows the procedure to remove and replace the worn V-belt of a Mazda 6. To gain better access to the belt, you need to remove the…
How to Replace the Timing Chain on a Mazda 6 2.3L
How to Replace the Timing Chain on a Mazda 6 2.3L
Mazda 6 (2002-2008 / GG, MK 1) In this guide, you will find the main instructions on how to remove and replace the timing chain on a Mazda 6 2.3L. First, open the car's bonnet and …

Other guides you may be interested in

How to Open the Fuel Filler Flap in the Hyundai i30?

In this tutorial, you will learn how to open the fuel filler flap in the Hyundai i30, a very simple operation that follows the typical procedure of most vehicles. First, unlock the locks using the designated button on the remote, then open the driver's door, locate the release lever on the left side of the seat, and operate it. Next, move to the fuel filler flap, open it completely, unscrew the cap, and refuel as needed. To close the flap, simply press it gently.

Watch the video!


by ScegliAuto

More videos