Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Interior Light Bulb Replacement

Model: Mazda 6 GG, MK 1 - Years: 2002, 2003, 2004, 2005, 2006, 2007, 2008
Part: Interior dome light bulb

See other generations:
Video tutorial

To access the courtesy light in the cabin, open the sunglasses holder located above the internal rear-view mirror. You will find two hex screws at the top; after removing them, act on the locking tabs located on the sides of the light unit, being careful not to force them too much.

At this point, the light unit is extracted and you have access to the non-functioning bulb. Rotate the bulb holder counterclockwise and gently pull it out. After replacing the bulb, check that the metal tabs are in good condition before reinserting the light unit into its housing.


Updated on 8 February 2026 by ScegliAuto


Related tutorials

How to Replace the Interior Light Bulb of the Mazda 6?
How to Replace the Interior Light Bulb of the Mazda 6?
Mazda 6 (2002-2008 / GG, MK 1) To replace the interior light bulb of the Mazda 6, loosen the screws that secure the light fitting in the centre upper part of the car's headlining. …
How to Replace the Interior Light Bulbs in the Mazda 6
How to Replace the Interior Light Bulbs in the Mazda 6
Mazda 6 (2012-2024 / GJ, MK 3) Today, let's go through the instructions for removing and replacing the interior light bulbs in the Mazda 6. First, get inside the vehicle and pry of…
Replacing the Cabin Fan on the Mazda 6
Replacing the Cabin Fan on the Mazda 6
Mazda 6 (2002-2008 / GG, MK 1) To replace the cabin fan on the Mazda 6, proceed as follows: 1) Disconnect the battery. 2) Open the passenger door and locate the cabin fan under the…

How to Open the Fuel Filler Flap in the Hyundai i30?

In this tutorial, you will learn how to open the fuel filler flap in the Hyundai i30, a very simple operation that follows the typical procedure of most vehicles. First, unlock the locks using the designated button on the remote, then open the driver's door, locate the release lever on the left side of the seat, and operate it. Next, move to the fuel filler flap, open it completely, unscrew the cap, and refuel as needed. To close the flap, simply press it gently.

Watch the video!


by ScegliAuto

More videos