Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Front Headlamp Bulb

Model: Mazda 6 GG, MK 1 - Years: 2002, 2003, 2004, 2005, 2006, 2007, 2008
Part: Headlight bulb

See other generations:
Video tutorial

To replace the bulbs, you must completely remove the front wheel to access the front lighting. Unscrew the retaining screws under the wheel arch and those under the bumper that secure the grille.

Remove the grille from the wheel arch and you will finally have access to the headlamp. Remove the protective cover with a flat screwdriver and using a Torx 15 key, unscrew the bulb holder, which should be gently pulled from its seat after disconnecting the electrical connector.

Place the assembly on a support and extract the bulb by removing the clips. Install the new bulb.

Refit the bulb holder in its respective seat and reposition the headlamp assembly, reconnecting the relevant connector. Screw in the retaining screws and reassemble everything.


Updated on 8 February 2026 by ScegliAuto


Related tutorials

Replacing the Front Headlamp Bulb on a Mazda 6
Replacing the Front Headlamp Bulb on a Mazda 6
Mazda 6 (2008-2012 / MK 2, GH) In this tutorial, you will learn how to replace the halogen/xenon bulb in the front headlamp of a Mazda 6. You won't need to remove the headlamp or a…
Replacing Front Headlamp Bulb on Mazda 6
Replacing Front Headlamp Bulb on Mazda 6
Mazda 6 (2008-2012 / MK 2, GH) Are the front headlamp bulbs on your Mazda 6 blown? Here’s how to replace them. Open the front splash guard by pulling the lever located at the botto…
Replacement of Front Headlamp Bulb
Replacement of Front Headlamp Bulb
Mazda 6 (2008-2012 / MK 2, GH) To replace the bulbs, it is necessary to completely remove the wheel to access the front lighting. Unscrew the retaining screws of the cover, those u…

Other guides you may be interested in

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos