Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Headlights on a Mazda 6

Model: Mazda 6 GJ, MK 3 - Years 2012-2024
Part: Headlight

In this tutorial, we will see how to replace the headlights on a Mazda 6, a very simple and quick operation. First, position the vehicle in front of a light-coloured wall, about two metres away, then turn on the ignition, activate the dipped beams, and open the bonnet. Next, locate the adjustment screw at the back of both headlights, tighten or loosen it with a cross-head screwdriver and position the beam slightly lower than the height of the bulb. Finally, test the new adjustment on the road.

Posted on 2 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Removing and Replacing the Front Headlights of the Mazda 6 MK2
Mazda 6 (2008-2012 / GH, MK 2) In this video tutorial, you will see how to remove and replace the front headlights of the second series Mazda 6, following these simple and quick st…
How to Locate the Fuses and Understand Their Diagrams in a Mazda 6
How to Locate the Fuses and Understand Their Diagrams in a Mazda 6
Mazda 6 (2012-2024 / GJ, MK 3) The first fuse panel you can locate in a Mazda 6 is inside the vehicle, positioned behind the plastic cover at the bottom left on the driver's side. …
Mazda 6 Fuse Diagram
Mazda 6 Fuse Diagram
Mazda 6 (2012-2024 / GJ, MK 3) This model from the Japanese manufacturer has two fuse boxes. The first is located in the cabin on the left side near the driver's door, while the se…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos