Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you remove the bumper of the Mazda 3?

Model: Mazda 3 BM, BN, MK 3 - Years: 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Front bumper

See other generations:
Video tutorial

We want to make our car more visually appealing by installing an aftermarket bumper with sportier lines, or is there a need to repair or repaint it? Well, let's watch the video tutorial available here and proceed with the execution of the work: opening the hood, we find a series of pins to remove along the upper band, then we move to the wheel arch area, also to be released to reach the rear pins and finally we lower and unscrew the pins along the entire lower band.

At this point, we disconnect the electrical connectors and carefully pull forward to completely release the structure.


Posted on 13 June 2025 by ScegliAuto


Related tutorials

Removing the Front Bumper on a Mazda 3
Removing the Front Bumper on a Mazda 3
Mazda 3 (2003-2009 / BK, MK 1) Is the front bumper of your Mazda 3 damaged? Let's see how to remove it. Lift the bonnet and secure it, then raise the car on a jack; unscrew the fas…
How to remove the rear bumper of the Mazda 3
How to remove the rear bumper of the Mazda 3
Mazda 3 (2003-2009 / BK, MK 1) Today we will explain how to remove the rear bumper of the Mazda 3 model produced from 2003 to 2009. We open the trunk of the vehicle and using an el…
How to programme the key of the Mazda 3?
How to programme the key of the Mazda 3?
Mazda 3 (2013-2019 / BM, BN, MK 3) To programme the key of the Mazda 3, insert the ignition key into the slot and simultaneously connect a diagnostic tool to the vehicle's OBD port. Th…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos