Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the rear bumper of the Mazda 3

Model: Mazda 3 BK, MK 1 - Years: 2003, 2004, 2005, 2006, 2007, 2008, 2009
Part: Rear bumper

See other generations:
Video tutorial

Today we will explain how to remove the rear bumper of the Mazda 3 model produced from 2003 to 2009. We open the trunk of the vehicle and using an electric screwdriver we remove the Philips screws on the top of the bumper. Using an 8mm Torx screwdriver, we unscrew the nuts on the side and bottom of the bumper.

We remove the plastic clips on the top and bottom of the bumper. Using an 8mm Torx key, we unscrew the nuts on the left side and bottom left of the bumper.

We then remove the bumper by pulling it outwards.


Posted on 21 May 2025 by ScegliAuto


Related tutorials

How to Remove the Rear Bumper on Mazda 3
How to Remove the Rear Bumper on Mazda 3
Mazda 3 (2009-2013 / BL, MK 2) Remove the rear bumper from a Mazda 3? Follow these steps to detach the rear bumper. Open the boot, unscrew the securing bolts located at the back of…
Removing the Front Bumper on a Mazda 3
Removing the Front Bumper on a Mazda 3
Mazda 3 (2003-2009 / BK, MK 1) Is the front bumper of your Mazda 3 damaged? Let's see how to remove it. Lift the bonnet and secure it, then raise the car on a jack; unscrew the fas…
How to Remove the Front Bumper on a Mazda 3
How to Remove the Front Bumper on a Mazda 3
Mazda 3 (2009-2013 / BL, MK 2) Want to remove the front bumper on a Mazda 3 to replace or repair it? This guide will show you how to proceed through the various stages of disassemb…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos