Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Rear Bumper on Mazda 3

Model: Mazda 3 MK 2, BL - Years 2009-2013
Part: Rear bumper

Remove the rear bumper from a Mazda 3? Follow these steps to detach the rear bumper. Open the boot, unscrew the securing bolts located at the back of the lights (after removing the inspection caps), and take them out after disconnecting the power connectors. Unscrew the screws at the bottom of the bumper, then remove the screws on the sides of the wheel arch liners. Once the bumper is free from any screws or bolts, grip it with your hands and pull it away from the bodywork (disconnect any power cables). Fit the new bumper with all the electrical connector connections.

Updated on 28 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to remove the rear bumper of the Mazda 3
How to remove the rear bumper of the Mazda 3
Mazda 3 (2003-2009 / BK, MK 1) Today we will explain how to remove the rear bumper of the Mazda 3 model produced from 2003 to 2009. We open the trunk of the vehicle and using an el…
Removing the Front Bumper on a Mazda 3
Removing the Front Bumper on a Mazda 3
Mazda 3 (2003-2009 / BK, MK 1) Is the front bumper of your Mazda 3 damaged? Let's see how to remove it. Lift the bonnet and secure it, then raise the car on a jack; unscrew the fas…
How to Remove the Front Bumper on a Mazda 3
How to Remove the Front Bumper on a Mazda 3
Mazda 3 (2009-2013 / MK 2, BL) Want to remove the front bumper on a Mazda 3 to replace or repair it? This guide will show you how to proceed through the various stages of disassemb…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos