Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Front Bumper on a Mazda 3

Model: Mazda 3 MK 2, BL - Years 2009-2013
Part: Front bumper

Want to remove the front bumper on a Mazda 3 to replace or repair it? This guide will show you how to proceed through the various stages of disassembly. First, lift the bonnet and secure it, then remove the plastic rivets on the bumper cover using a screwdriver (use a battery-powered screwdriver to speed up the process). Unscrew the screws around the perimeter of the undertray at the bottom of the bumper. Once the bumper is free from constraints, you can detach it from the vehicle body. For reassembly, proceed in reverse order. - Screwdriver with various bits - Pliers - Socket wrench with sockets.

Updated on 25 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Removing the Front Bumper on a Mazda 3
Removing the Front Bumper on a Mazda 3
Mazda 3 (2003-2009 / BK, MK 1) Is the front bumper of your Mazda 3 damaged? Let's see how to remove it. Lift the bonnet and secure it, then raise the car on a jack; unscrew the fas…
How to disassemble the front bumper on the Mazda 3?
How to disassemble the front bumper on the Mazda 3?
Mazda 3 (2009-2013 / MK 2, BL) In this tutorial, we can see how to remove the front bumper on the Mazda 3, an extremely simple and quick operation. First, we open the hood, then we…
How to Remove the Front Bumper on a Mazda 3?
How to Remove the Front Bumper on a Mazda 3?
Mazda 3 (2013-2019 / MK 3, BN, BM) .. In this tutorial, you will see how to remove the front bumper on a Mazda 3, a very simple and quick operation. First, open the bonnet... …

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos