Do it yourself
Frequently asked questions about cars and motorcycles

How to Remove the Front Bumper on a Mazda 3?

Model: Mazda 3 BM, BN, MK 3 - Years: 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Front bumper

See other generations:
Video tutorial

In this tutorial, you will see how to remove the front bumper on a Mazda 3, a very simple and quick operation. First, open the bonnet.

Then, unclip the upper plastic rivets and undo the bolts securing the air intake. Next, move to the wheel arch area, remove the additional indicated rivets, and continue by unscrewing the bolts from the lower cover.

At this point, simply grasp the bumper, pull it outwards, and separate it from the chassis. To fit the replacement, just follow the reverse procedure.


Updated on 16 August 2026 by ScegliAuto


Related tutorials

Mazda 3 (2009-2013 / BL, MK 2) How do you remove the front fog light from the Mazda 3? Follow these steps to remove the fog light from the Mazda. Lift the car with a jack, then loc…
Mazda 3 (2003-2009 / BK, MK 1) Is the front bumper of your Mazda 3 damaged? Let's see how to remove it. Lift the bonnet and secure it, then raise the car on a jack; unscrew the fas…
Mazda 3 (2009-2013 / BL, MK 2) Want to remove the front bumper on a Mazda 3 to replace or repair it? This guide will show you how to proceed through the various stages of disassemb…

How to open the boot if it is stuck on a Mercedes B-Class?

On the Mercedes B-Class, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In this case, perform the emergency opening by following the simple procedure shown in this tutorial. First, unlock the locks with the remote control, then open the rear doors and, by operating the indicated lever, lower the backrest of the seat. Next, go inside the boot, locate the indicated gap, and manually unlock the lock using a small screwdriver.

Watch the video!


by ScegliAuto

More videos