Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mazda
    3. :
  3. Mazda 3
    4. : Oil filter

Mazda 3 - Oil filter

Mazda 3 (2003-2009 / BK, MK 1)
How to replace an engine oil filter on Mazda Mazda 3
How to replace the engine oil filter on Mazda Mazda 3? Let's see how to proceed in replacing the pieces. We lift the car with a column bridge and put it in …read all…
Posted on 28 October 2023 by ScegliAuto
Mazda 3 (2003-2009 / BK, MK 1)
How to change the engine oil and oil filter.
Place the car on the deck and lift it so that you can work on it at the bottom. Identify the position of the oil filter and, with the appropriate wrench, …read all…
Posted on 13 September 2023 by ScegliAuto
Mazda 3 (2003-2009 / BK, MK 1)
Oil filter cartridge replacement
This video shows us how to replace the oil filter cartridge. Once the car has been raised and all the used oil has been released, the oil filter can be …read all…
Posted on 24 July 2023 by ScegliAuto
Cigarette Lighter (1) Airbags (4) Alternator (3) Loudspeaker (2) Shock absorbers (7) Air conditioning (5) Car stereo (7) Anti roll bar (1) Battery (6) Air Vents (1) Spark plugs (8) Bodywork (3) Key (24) V-belt (1) -board computer (10) Checks and maintenance (32) Throttle body (1) Dashboard (2) Brake discs (2) Headlight (3) Tail light (4) Fog lights (1) Air filter (5) Cabin air filter (10) Petrol filter (2) Diesel filter (3) Oil filter (3) Hand brake (1) Grille (1) Accessory Kit (10) Xenon headlight kit (1) Light bulb (5) Side turn signal light bulb (2) Headlight bulb (12) Rear light bulb (5) Interior lights ceiling light bulb (2) Antifreeze liquid (1) Handle (5) Engine (1) Gear oil (2) Brake oil (1) Engine oil (14) Power steering oil (1) Door panel (5) Front bumper (6) Rear bumper (1) Brake pads (6) Tires (8) Gear Shift Knob (1) Pump (1) Instrument cluster (14) Radiator (1) Fuse box (10) Seat (4) Coolant temperature sensor (3) Outside rearview mirror (9) Interior rearview mirror (1) Manufacturer's coat of arms (1) Windscreen wipers (4) Central tunnel (2) Valve (1) Interior blower (1) Steering wheel (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos