Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mazda
    3. :
  3. Mazda 3
    4. : Tail light

Mazda 3 - Tail light

Mazda 3 (2009-2013 / MK 2, BL)
How to remove the rear lights of the Mazda 3?
In this tutorial, we can see how to remove the rear lights of the Mazda 3, a very simple and quick operation to be carried out in case we need to replace a …read all…
Posted on 31 March 2023 by ScegliAuto
Mazda 3 (2009-2013 / MK 2, BL)
How to disassemble the rear light of the Mazda 3
Today we will see, in this video tutorial, how to remove and replace the rear light and its bulbs of the Mazda 3. First we open the tailgate of the trunk and …read all…
Posted on 7 November 2022 by ScegliAuto
Mazda 3 (2009-2013 / MK 2, BL)
How to remove the rear light of a Mazda 3
How do you remove the rear light of a Mazda 3? Let's see the disassembly of the lighthouse. We raise the boot of the luggage compartment, then, we remove the …read all…
Posted on 26 November 2023 by ScegliAuto
Mazda 3 (2003-2009 / BK, MK 1)
Replacement of the rear light
Open the tailgate of the boot and proceed to identify the rear part of the headlight on which to replace, it will be necessary to remove the rigid panel on the …read all…
Posted on 24 September 2023 by ScegliAuto
Cigarette Lighter (1) Airbags (4) Alternator (3) Loudspeaker (2) Shock absorbers (7) Air conditioning (5) Car stereo (7) Anti roll bar (1) Battery (6) Air Vents (1) Spark plugs (8) Bodywork (3) Key (24) V-belt (1) -board computer (10) Checks and maintenance (32) Throttle body (1) Dashboard (2) Brake discs (2) Headlight (3) Tail light (4) Fog lights (1) Air filter (5) Cabin air filter (10) Petrol filter (2) Diesel filter (3) Oil filter (3) Hand brake (1) Grille (1) Accessory Kit (10) Xenon headlight kit (1) Light bulb (5) Side turn signal light bulb (2) Headlight bulb (12) Rear light bulb (5) Interior lights ceiling light bulb (2) Antifreeze liquid (1) Handle (5) Engine (1) Gear oil (2) Brake oil (1) Engine oil (14) Power steering oil (1) Door panel (5) Front bumper (6) Rear bumper (1) Brake pads (6) Tires (8) Gear Shift Knob (1) Pump (1) Instrument cluster (14) Radiator (1) Fuse box (10) Seat (4) Coolant temperature sensor (3) Outside rearview mirror (9) Interior rearview mirror (1) Manufacturer's coat of arms (1) Windscreen wipers (4) Central tunnel (2) Valve (1) Interior blower (1) Steering wheel (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos