Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mazda
    3. :
  3. 3
    4. : How to disassemble the rear light of the Mazda 3

Mazda 3 - Video tutorial

Model: Mazda 3 MK 2, BL - Years 2009-2013
Part: Tail light
Operation: How to disassemble the rear light of the Mazda 3

Today we will see, in this video tutorial, how to remove and replace the rear light and its bulbs of the Mazda 3. First we open the tailgate of the trunk and start by removing the plastic caps that we find behind the rear light; then unscrew the fixing screws to be able to extract the light from the outside, disconnecting the electrical connector of the bulbs, as shown in the video. At this point, eventually replace the headlight bulbs, or the whole headlight directly; then we reassemble everything, applying the reverse procedure!


Posted on 7 November 2022 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos