Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the rear lights from the Mazda 3?

Model: Mazda 3 MK 2, BL - Years 2009-2013
Part: Tail light

In this tutorial, see how to remove the rear lights from the Mazda 3, a very simple and quick operation, necessary if you need to replace a bulb or the entire unit. First, open the boot lid, then remove the panel at the back of the light in question. Once done, disconnect the two power connectors and, using an 8 mm socket, undo the three securing nuts. At this point, grasp the light, pull it towards you, and extract it from the bodywork. To fit the replacement, follow the reverse procedure.

Updated on 19 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Rear Seatbelts in a Mazda 3?
How to Remove the Rear Seatbelts in a Mazda 3?
Mazda 3 (2009-2013 / MK 2, BL) In this tutorial, see how to remove the rear seatbelts in a Mazda 3, a straightforward task if you have good manual skills. First, open the rear door…
How to Replace the Front Headlamp Bulbs on a Mazda 3
How to Replace the Front Headlamp Bulbs on a Mazda 3
Mazda 3 (2003-2009 / BK, MK 1) Learn how to replace the front headlamp bulbs on a Mazda 3 with LED bulbs: open the bonnet (pull the lever located at the bottom right of the dashboa…
How to Replace the Bulbs in the Rear Light of a Mazda 3
How to Replace the Bulbs in the Rear Light of a Mazda 3
Mazda 3 (2009-2013 / MK 2, BL) Change the blown bulbs inside the boot from which you access the rear light of a Mazda 3. Use a screwdriver to remove the plastic panel covering the …

How to reset the tyre pressure warning light on the Suzuki Jimny?

To reset the tyre pressure warning light on the Suzuki Jimny, first inflate the tyres to the pressure value indicated on the corresponding sticker: this is located at the bottom of the driver's door pillar. Once the tyres are inflated, insert the ignition key and turn on the instrument panel: select the screen that indicates the tyre pressures, checking that the values change. After a few seconds, the tyre pressure warning light will automatically turn off.

Watch the video!


by ScegliAuto

More videos