Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace fog lights in the Mazda 3?

Model: Mazda 3 MK 2, BL - Years 2009-2013
Part: Fog lights

In this tutorial we can see how to replace the fog lights in the Mazda 3, an extremely simple and quick operation. First of all, make sure that the key is not inserted, then lift the front side of the vehicle taking all necessary safety measures. Next, remove the protective panel located under the bumper corner by unscrewing the bolts, locate the headlight in question and disconnect the power connector. At this point, all that remains is to unscrew the indicated bolts, remove the headlight from the housing and install the replacement following the reverse procedure.

Posted on 3 April 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Fog Light from the Mazda 3 Bumper
How to Remove the Fog Light from the Mazda 3 Bumper
Mazda 3 (2009-2013 / MK 2, BL) How do you remove the front fog light from the Mazda 3? Follow these steps to remove the fog light from the Mazda. Lift the car with a jack, then loc…
How to reset the oil light on the Mazda 3
How to reset the oil light on the Mazda 3
Mazda 3 (2013-2019 / MK 3, BN, BM) In the following guide dedicated to your Mazda 3, we will discover the steps you need to take in order to correctly reset the oil light on the car's …
How to Replace the Reverse Bulbs on a Mazda 3
How to Replace the Reverse Bulbs on a Mazda 3
Mazda 3 (2009-2013 / MK 2, BL) To replace the reverse bulbs on a Mazda 3, lift the tailgate of the boot and remove the rivets securing the carpet at the back of the tailgate. Once …

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos