Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the fog light bulbs of a Mazda 3 MK2

Model: Mazda 3 BL, MK 2 - Years: 2009, 2010, 2011, 2012, 2013
Part: Fog lights

See other generations:
Video tutorial

In this video we see how to replace the fog light bulbs on a Mazda 3 MK2: for example, if we are working on the left fog light, we will need to turn the steering wheel completely to the right, because we will access it from the wheel well. And so we need to create space by moving the wheel.

On the front bumper there are three clips that we need to remove, with a crosshead screwdriver. We lift the cover and from there, using a flashlight, we can access the back of the fog light.

We remove the blue electrical connector, turn the cap to the left by 1/8 of a turn and the H11 bulb comes off with the cap. We replace it (without touching the bulb with bare hands, or the lifespan will be much shorter), put it back in place, insert the electrical connector and close the wheel well clips.

Job done.


Posted on 9 March 2025 by ScegliAuto


Related tutorials

How to Remove the Fog Light from the Mazda 3 Bumper
How to Remove the Fog Light from the Mazda 3 Bumper
Mazda 3 (2009-2013 / BL, MK 2) How do you remove the front fog light from the Mazda 3? Follow these steps to remove the fog light from the Mazda. Lift the car with a jack, then loc…
How to replace the bulbs of the interior dome light of the Mazda 3
How to replace the bulbs of the interior dome light of the Mazda 3
Mazda 3 (2009-2013 / BL, MK 2) Today we will see the instructions that will allow us to disassemble and replace the bulbs of the interior light of the Mazda 3. First of all, we get…
How to Remove the Rear Light on the Mazda 3
How to Remove the Rear Light on the Mazda 3
Mazda 3 (2009-2013 / BL, MK 2) Today, you will see in this video tutorial how to remove and replace the rear light and its bulbs on the Mazda 3. First, open the boot lid and start …

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos