Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the bulbs of the interior dome light of the Mazda 3

Model: Mazda 3 MK 2, BL - Years 2009-2013
Part: Interior dome light bulb

Today we will see the instructions that will allow us to disassemble and replace the bulbs of the interior light of the Mazda 3. First of all, we get into the car and start by removing the plastic light fixture, leveraging the sides with thin tools; then we disconnect the electrical connector of the bulbs, as shown in the video. At this point, we release the light fixture from the socket to access the bulbs, replacing them if necessary with new ones (having the same fitting); we check their operation and finally reassemble the interior light fixture!

Posted on 28 December 2024 by ScegliAuto

Video tutorial

Related tutorials

Replacing Interior Dome Lights with LEDs
Replacing Interior Dome Lights with LEDs
Mazda 3 (2003-2009 / BK, MK 1) Remove the dome light to access the bulb holder by simply prying the outer edge with a plastic tool and disconnecting the connector. Rotate the knob …
How to Remove the Rear Light on the Mazda 3
How to Remove the Rear Light on the Mazda 3
Mazda 3 (2009-2013 / MK 2, BL) Today, you will see in this video tutorial how to remove and replace the rear light and its bulbs on the Mazda 3. First, open the boot lid and start …
How to Replace the Bulbs in the Rear Light of a Mazda 3
How to Replace the Bulbs in the Rear Light of a Mazda 3
Mazda 3 (2009-2013 / MK 2, BL) Change the blown bulbs inside the boot from which you access the rear light of a Mazda 3. Use a screwdriver to remove the plastic panel covering the …

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos