Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Interior Light Bulb

Model: Mazda 3 BK, MK 1 - Years: 2003, 2004, 2005, 2006, 2007, 2008, 2009
Part: Interior dome light bulb

See other generations:
Video tutorial

Remove the cover of the interior light to access the bulb holder. Disconnect the light by removing the connector.

Open the lower compartment of the light by pushing it outward. You can now access the bulb.

Choose a new replacement bulb identical to the one being replaced. Remove the faulty bulb and install the new one. Refit the interior light by reconnecting the power cable.

Test for correct operation. The same procedure can be performed on other interior lights, taking care to remove the cover without breaking it.


Updated on 7 February 2026 by ScegliAuto


Related tutorials

How to replace the bulbs of the interior dome light of the Mazda 3
How to replace the bulbs of the interior dome light of the Mazda 3
Mazda 3 (2009-2013 / BL, MK 2) Today we will see the instructions that will allow us to disassemble and replace the bulbs of the interior light of the Mazda 3. First of all, we get…
Replacing Interior Dome Lights with LEDs
Replacing Interior Dome Lights with LEDs
Mazda 3 (2003-2009 / BK, MK 1) Remove the dome light to access the bulb holder by simply prying the outer edge with a plastic tool and disconnecting the connector. Rotate the knob …
How to Replace the Front Headlight Bulb on the 2022 Mazda 3
How to Replace the Front Headlight Bulb on the 2022 Mazda 3
Mazda 3 (2019-2026 / MK 4, BP) The steps to replace the front headlight bulb on the 2022 Mazda 3 are: - open the bonnet by pulling the lever under the steering wheel; - disconnect …

How to Reset the Tyre Pressure Warning Light on the Jeep Renegade?

To reset the tyre pressure warning light on the Jeep Renegade, inflate the tyres until they reach the recommended pressure: this value is indicated on the sticker attached to the driver’s door pillar. Once the tyres are properly inflated, navigate through the menu that appears on the instrument cluster until you find the tyre pressure option. At this point, press and hold the OK button on the right side of the steering wheel to make the warning light disappear.

Watch the video!


by ScegliAuto

More videos