Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mazda
    3. :
  3. Mazda 3
    4. : Windscreen wipers

Mazda 3 - Windscreen wipers

Mazda 3 (2003-2009 / BK, MK 1)
How to check the water in the windshield wipers of the Mazda 3
In this video you will be shown how to check the water level of the wipers. First of all, enter the passenger compartment, pull the lever on the hood located …read all…
Posted on 21 September 2023 by ScegliAuto
Mazda 3 (2003-2009 / BK, MK 1)
Wipers replacement: here's how
Having the windows clean and free from water or other is essential for road safety. For this reason, here the wipers come to our aid; but like any component, …read all…
Posted on 24 July 2023 by ScegliAuto
Mazda 3 (2003-2009 / BK, MK 1)
Change the wiper blades
The mechanisms that hold the wiper blades in place can often be cumbersome, but you just need to know how to act and everything can be solved in a few minutes. …read all…
Posted on 22 July 2023 by ScegliAuto
Mazda 3 (2009-2013 / MK 2, BL)
Wiper blade replacement
Lift the wiper rod, rotate the blade 90Â ° and push it down to release it: pay attention so that the arm without the blade does not damage the windshield. …read all…
Posted on 18 July 2023 by ScegliAuto
Cigarette Lighter (1) Airbags (4) Alternator (3) Loudspeaker (2) Shock absorbers (7) Air conditioning (5) Car stereo (7) Anti roll bar (1) Battery (6) Air Vents (1) Spark plugs (8) Bodywork (3) Key (24) V-belt (1) -board computer (10) Checks and maintenance (32) Throttle body (1) Dashboard (2) Brake discs (2) Headlight (3) Tail light (4) Fog lights (1) Air filter (5) Cabin air filter (10) Petrol filter (2) Diesel filter (3) Oil filter (3) Hand brake (1) Grille (1) Accessory Kit (10) Xenon headlight kit (1) Light bulb (5) Side turn signal light bulb (2) Headlight bulb (12) Rear light bulb (5) Interior lights ceiling light bulb (2) Antifreeze liquid (1) Handle (5) Engine (1) Gear oil (2) Brake oil (1) Engine oil (14) Power steering oil (1) Door panel (5) Front bumper (6) Rear bumper (1) Brake pads (6) Tires (8) Gear Shift Knob (1) Pump (1) Instrument cluster (14) Radiator (1) Fuse box (10) Seat (4) Coolant temperature sensor (3) Outside rearview mirror (9) Interior rearview mirror (1) Manufacturer's coat of arms (1) Windscreen wipers (4) Central tunnel (2) Valve (1) Interior blower (1) Steering wheel (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos