Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Check the Windscreen Washer Fluid on a Mazda 3

Model: Mazda 3 BK, MK 1 - Years 2003-2009
Part: Windshield wipers

This guide will show you how to check the level of the windscreen washer fluid. First, enter the cabin and pull the bonnet release lever located at the bottom left. Once this is done, open the engine bay. The windscreen washer fluid reservoir is located to the left of your vehicle. It is indicated by a yellow cap with a drawing of a windscreen and a water jet. Lift the cap and check that there is fluid inside. If there isn't enough fluid, add more, ensuring it reaches the correct level. Once done, close everything up.

Updated on 23 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Wiper Blade Replacement: Here's How to Do It
Wiper Blade Replacement: Here's How to Do It
Mazda 3 (2003-2009 / BK, MK 1) Having clean and water-free windows is essential for road safety. For this reason, wiper blades come to our aid; however, like any component, they al…
How to Check the Fuses of the Mazda 3
How to Check the Fuses of the Mazda 3
Mazda 3 (2003-2009 / BK, MK 1) Do you want to check the electrical system of your Mazda 3 and don't know how? What you need to do is open the bonnet, and on your right, you will fi…
What is the fuse diagram for the Mazda 3?
What is the fuse diagram for the Mazda 3?
Mazda 3 (2019-2026 / MK 4, BP) If some devices in our Mazda 3 have suddenly stopped working, we can first check the status of the related fuses, the diagrams of which are shown in …

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos