Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mazda
    3. :
  3. 3
    4. : Wipers replacement: here's how

Mazda 3 - Video tutorial

Model: Mazda 3 BK, MK 1 - Years 2003-2009
Part: Windscreen wipers
Operation: Wipers replacement: here's how

Having the windows clean and free from water or other is essential for road safety. For this reason, here the wipers come to our aid; but like any component, they too need to be replaced. Fortunately, it is very simple: it is sufficient, with a small screwdriver, to raise the tab where the word "Open" is (not present in every brand of wiper, but the tab is the same) and raise it slightly. Pull up the wiper and continue to raise the tab until you are able, with a slight push, to remove the blade. To fit the new one, make sure you put it in the right direction and do not exaggerate pressure. That's it, easy easy.


Posted on 24 July 2023 by ScegliAuto



How to check the water in the windshield wipers of the Mazda 3
Mazda 3 (2003-2009 / BK, MK 1) In this video you will be shown how to check the water level of the wipers. First of all, enter the passenger compartment, pull the lever on the hood
Replacement of the rear lights bulbs of the Mazda 3.
Mazda 3 (2013-2019 / MK 3, BN, BM) In this video, we see what to do if one of the rear light bulbs were to burn out; we see how to proceed with the replacement. We open the trunk door,
Fog light bulb replacement
Mazda 3 (2003-2009 / BK, MK 1) To carry out this replacement it will be necessary to work from the lower part of the car, in fact you will have to remove the panel under the engine

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos