Do it yourself
| ||||
|
Mazda 3 - Video tutorial
Model: Mazda 3
BL, MK 2
- Years 2009-2013 The tutorial explains in the first part how to change the engine oil. Use a jack (supplied with the car accessories) to lift the vehicle off the ground, and open the front hood of the car. In the front part under the engine locate the oil drain valve, place a pan and open the valve to let out the residual old oil, once the drain is finished close the valve again. Locate the oil tank in the bonnet in correspondence with the dipstick from which its presence is detected and top up with 3/4 liters of oil, close the cap. In the second part you go to replace the oil filter, refer to the old filter located near the drain valve under the engine, unscrew it and screw the new one. The last part is dedicated to the replacement of the wiper blades, they are interlocking so it will be sufficient to remove the old ones and replace them. Instruments: 3/4 liter oil pan, oil filter, wiper blades
Posted on 22 July 2023 by ScegliAuto
How to change the oil, oil filter and spark plugs on a Mazda 3
Mazda 3 (2003-2009 / MK 1, BK) We see in this video how to change the oil, oil filter and spark plugs on a Mazda 3. The Mazda 3 is boxed in the lower part, so we have to remove the
Change the wiper blades
Mazda 3 (2003-2009 / MK 1, BK) The mechanisms that hold the wiper blades in place can often be cumbersome, but you just need to know how to act and everything can be solved in a fe
Instructions for changing the filter and engine oil
Mazda 3 (2009-2013 / BL, MK 2) To change the oil you must first raise the car observing all safety regulations. Get a container to collect the oil and unscrew the drain screw, as s Other guides that may interest you
|
How to activate the cruise control of the Nissan QashqaiLet's see how the cruise control is activated on the Nissan Qashqai: you have to activate it by putting the cruise control switch to "on", then, using only the right spoke of the steering wheel, press the "set-" button, then the "res +" button also on the right spoke of the steering wheel and the cruise control indicator lights up on the car's instrument panel display. If the brake pedal is pressed while the cruise control is in operation or if the "cancel" button on the right spoke of the steering wheel is pressed, the cruise control will automatically deactivate and the cruise control indicator on the instrument panel will go out. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.067
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |