Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mazda
    3. :
  3. 6
    4. : How to change the solenoid purge valve on a Mazda-6

Mazda 6 - Video tutorial

Model: Mazda 6 MK 1, GG - Years 2002-2008
Part: Valve
Operation: How to change the solenoid purge valve on a Mazda-6

Let's see together how to disassemble and replace the solenoid purge valve of a Mazda-6. Let's open the bonnet, lift it and put it in safety. We detach the metal clamps (placed in the engine compartment) from the sleeves with a needle nose pliers, remove the valve from both ends and disconnect the power supply terminal with your hands. After comparing the damaged valve with the new one, mount it on the sleeves located in the engine compartment, tighten it well with the metal clamps and connect the clamp. We test the correct functioning of the car.


Posted on 1 October 2023 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos