Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mazda
    3. :
  3. Mazda 3
    4. : Door panel

Mazda 3 - Door panel

Mazda 3 (2009-2013 / MK 2, BL)
How do you remove the door panel of the Mazda 3?
The replacement of the door panel on the Mazda 3 is done by levering with an object such as a screwdriver, in order to remove the trims in the seat of the …read all…
Posted on 29 August 2023 by ScegliAuto
Mazda 3 (2013-2019 / MK 3, BN, BM)
How do you remove the door panel of the Mazda 3?
In order to remove the door panel of the Mazda 3, you need to use an object like a screwdriver to pry off the covers that are covering the inner part of the …read all…
Posted on 17 August 2023 by ScegliAuto
Mazda 3 (2013-2019 / MK 3, BN, BM)
How to remove the door panel of a Mazda 3
Before we can begin, we will have to go to open the door of our Mazda 3. Using a thin but strong tool, we begin by going to disengage and remove the inserts of …read all…
Posted on 4 February 2024 by ScegliAuto
Mazda 3 (2003-2009 / BK, MK 1)
We remove the door panel (driver's side) on Mazda 3
Remove the door panel (driver's side) on Mazda 3: disconnect the battery terminals in the engine compartment (if we have to disconnect the terminals), with a …read all…
Posted on 4 November 2023 by ScegliAuto
Mazda 3 (2009-2013 / MK 2, BL)
We perform the disassembly of the door panel (rear left) on Mazda 3
We perform the disassembly of the door panel (rear left) on Mazda 3: disconnect the battery terminals in the engine compartment, with a screwdriver we unscrew …read all…
Posted on 4 November 2023 by ScegliAuto
Cigarette Lighter (1) Airbags (4) Alternator (3) Loudspeaker (2) Shock absorbers (7) Air conditioning (5) Car stereo (7) Anti roll bar (1) Battery (6) Air Vents (1) Spark plugs (8) Bodywork (3) Key (24) V-belt (1) -board computer (10) Checks and maintenance (32) Throttle body (1) Dashboard (2) Brake discs (2) Headlight (3) Tail light (4) Fog lights (1) Air filter (5) Cabin air filter (10) Petrol filter (2) Diesel filter (3) Oil filter (3) Hand brake (1) Grille (1) Accessory Kit (10) Xenon headlight kit (1) Light bulb (5) Side turn signal light bulb (2) Headlight bulb (12) Rear light bulb (5) Interior lights ceiling light bulb (2) Antifreeze liquid (1) Handle (5) Engine (1) Gear oil (2) Brake oil (1) Engine oil (14) Power steering oil (1) Door panel (5) Front bumper (6) Rear bumper (1) Brake pads (6) Tires (8) Gear Shift Knob (1) Pump (1) Instrument cluster (14) Radiator (1) Fuse box (10) Seat (4) Coolant temperature sensor (3) Outside rearview mirror (9) Interior rearview mirror (1) Manufacturer's coat of arms (1) Windscreen wipers (4) Central tunnel (2) Valve (1) Interior blower (1) Steering wheel (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos