Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mazda
    3. :
  3. 3
    4. : We perform the disassembly of the door panel (rear left) on Mazda 3

Mazda 3 - Video tutorial

Model: Mazda 3 MK 2, BL - Years 2009-2013
Part: Door panel
Operation: We perform the disassembly of the door panel (rear left) on Mazda 3

We perform the disassembly of the door panel (rear left) on Mazda 3: disconnect the battery terminals in the engine compartment, with a screwdriver we unscrew the screws located in the space of the upper lever of the door opening and the screws present in the handle (after removing the plastic coating). Unscrew the remaining screws on the door panel and detach the clips for tightening it. Finally, remove the panel with your hands and unhook it from the door (disconnect the power cables and the opening cable). We carry out the desired maintenance inside the door.


Posted on 4 November 2023 by ScegliAuto



Loudspeaker disassembly of a Mazda 3
Mazda 3 (2009-2013 / MK 2, BL) Let's see the disassembly of the door panel of a Mazda 3 with the attached disassembly of the damaged speaker. To access the speaker we have to remov
How to remove the door panel of a Mazda 3
Mazda 3 (2013-2019 / MK 3, BN, BM) Before we can begin, we will have to go to open the door of our Mazda 3. Using a thin but strong tool, we begin by going to disengage and remove the
How to open the locked fuel door on the Mazda 3?
Mazda 3 (2013-2019 / MK 3, BN, BM) In the Mazda 3, it may happen that the fuel door gets stuck, for example due to a problem with the control button or the lock actuator. In these case

Other guides that may interest you

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos