Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the External Door Handle of the Front Door on a Mazda 3

Model: Mazda 3 MK 3, BN, BM - Years 2013-2019
Part: Handle

The instructions in this guide will allow you to remove and replace the external door handle of the front door on a Mazda 3. First, open the front door of the vehicle and begin to remove the door panel, gaining access to the internal components; then disconnect the handle mechanism and unscrew the side screw of the door to detach and remove it, as shown in the video. At this point, carry out the repair or replacement of the external door handle, securing it properly and finally reassembling all other components!

Posted on 11 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the external door handle on a Mazda 3
How to replace the external door handle on a Mazda 3
Mazda 3 (2003-2009 / BK, MK 1) This guide will show you how to remove and replace the external door handle on a Mazda 3, following the instructions below. First, open the front doo…
How to Remove the External Door Handle of the Mazda 3?
How to Remove the External Door Handle of the Mazda 3?
Mazda 3 (2019-2026 / MK 4, BP) To detach the external handle of the Mazda 3, first open the door and remove the screw located at the side of the door, covered by a plastic cap. Thi…
How to Replace the External Handle on a Mazda 3
How to Replace the External Handle on a Mazda 3
Mazda 3 (2003-2009 / BK, MK 1) To replace the external handle on a Mazda 3, you need to completely remove the door panel. Start by loosening the fixing bolts located under the grab…

How to Open the Bonnet of a Renault Megane if the Lever is Broken?

If the lever that unlocks the bonnet of the Renault Megane is broken or not functioning, there is an emergency procedure to unlock the mechanism: remove the right front grille located at the top of the bumper. Once the grille is removed, you can locate the actuator mechanism: by pulling the spring in this position, you can unlock the actuator, allowing you to lift the bonnet and access the components located inside the engine compartment. You can then close the bonnet simply by lowering it.

Watch the video!


by ScegliAuto

More videos