Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the External Handle on a Mazda 3

Model: Mazda 3 BK, MK 1 - Years 2003-2009
Part: Handle

To replace the external handle on a Mazda 3, you need to completely remove the door panel. Start by loosening the fixing bolts located under the grab handle and at the internal handle's location. Once these screws are loosened, you can detach the panel completely, disconnecting any relevant connectors as well. At this point, remove the fabric covering the handle from the inside by unscrewing its screws and pulling out the old handle from the outside of the door. This will allow you to insert the new handle, securing it in place and reinstalling the panel.

Updated on 14 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the External Door Handle of the Mazda 3?
How to Remove the External Door Handle of the Mazda 3?
Mazda 3 (2019-2026 / MK 4, BP) To detach the external handle of the Mazda 3, first open the door and remove the screw located at the side of the door, covered by a plastic cap. Thi…
How to replace the external door handle on a Mazda 3
How to replace the external door handle on a Mazda 3
Mazda 3 (2003-2009 / BK, MK 1) This guide will show you how to remove and replace the external door handle on a Mazda 3, following the instructions below. First, open the front doo…
How to Remove the External Door Handle of the Front Door on a Mazda 3
How to Remove the External Door Handle of the Front Door on a Mazda 3
Mazda 3 (2013-2019 / MK 3, BN, BM) The instructions in this guide will allow you to remove and replace the external door handle of the front door on a Mazda 3. First, open the front do…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos