Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Interior Handle on a Mazda 3?

Model: Mazda 3 BK, MK 1 - Years 2003-2009
Part: Handle

In this tutorial, you will see how to remove the interior handle on a Mazda 3, a very simple and quick operation. First, go inside the cabin, then remove the two plastic caps indicated, one located inside the handle to be removed and one behind the support handle, and unscrew the screws just freed. Next, grasp the panel, pull it towards you, and separate it from the door. At this point, you can disconnect both the window regulator connector and the lock cable, remove the old handle, and fit the replacement.

Updated on 24 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the External Door Handle of the Mazda 3?
How to Remove the External Door Handle of the Mazda 3?
Mazda 3 (2019-2026 / MK 4, BP) To detach the external handle of the Mazda 3, first open the door and remove the screw located at the side of the door, covered by a plastic cap. Thi…
How to Replace the External Handle on a Mazda 3
How to Replace the External Handle on a Mazda 3
Mazda 3 (2003-2009 / BK, MK 1) To replace the external handle on a Mazda 3, you need to completely remove the door panel. Start by loosening the fixing bolts located under the grab…
How to replace the external door handle on a Mazda 3
How to replace the external door handle on a Mazda 3
Mazda 3 (2003-2009 / BK, MK 1) This guide will show you how to remove and replace the external door handle on a Mazda 3, following the instructions below. First, open the front doo…

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos