Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mazda
    3. :
  3. 3
    4. : Headlight bulb replacement.

Mazda 3 - Video tutorial

Model: Mazda 3 BK, MK 1 - Years 2003-2009
Part: Headlight bulb
Operation: Headlight bulb replacement.

The limited space available for the operation does not make it easy to disassemble the lamp. The first operation consists in releasing the bulb holder holding spring by moving it to the left. Carefully remove the bulb holder and to facilitate the operation completely remove the retaining hook. Unhook the lamp retaining hook and remove it completely taking care not to drop it. Remove the lamp from the socket. Refit the new lamp in the lamp holder paying attention to the reference notch in order to fit the lamp correctly. Be careful not to touch the lamp bulb with your hands. Carefully refit the lamp retaining hook and fit the assembly into the headlight checking that the hooks and gasket are in place correctly.


Posted on 18 July 2023 by ScegliAuto



Headlight bulb replacement
Mazda 3 (2003-2009 / BK, MK 1) To replace the headlight bulb, it is first necessary to remove the plastic covers right above the headlight in order to access the bulb holder. Then
Headlight bulb replacement
Mazda 3 (2003-2009 / BK, MK 1) To be able to replace the headlight bulb, open the hood and remove the triangular-shaped plastic cover located just above the headlight. At this poin
Headlight bulb replacement
Mazda 3 (2003-2009 / BK, MK 1) To replace the headlight bulb, first remove the plastic cover between the fuse keypad and the engine cover. At this point, unhook the socket connecte

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos