Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mazda
    3. :
  3. 3
    4. : Where are the sidelight fuses located in the Mazda 3?

Mazda 3 - Video tutorial

Model: Mazda 3 MK 1, BK - Years 2003-2009
Part: Headlight bulb
Operation: Where are the sidelight fuses located in the Mazda 3?

In the event that the sidelights of our Mazda 3 suddenly stop working, and both bulbs are in good condition, it is most likely that it is a fault of the associated fuses whose location is indicated in this video. As shown, they are located in the box located inside the passenger compartment, behind the passenger glove compartment, and are labeled with the initials F46 and F81. The first concerns the right side while the second the left side. In the event of a blown fuse, we use a replacement of the same specification and always operate with the vehicle switched off.


Posted on 6 April 2023 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos