Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Front Bumper

Model: Mazda 3 BK, MK 1 - Years 2003-2009
Part: Front bumper

To remove the front bumper, open the bonnet and use a cross-head screwdriver and a flat-head screwdriver to unscrew the bolts securing it. Next, raise the vehicle on a ramp to easily access the screws on the underside, particularly those next to the tyres. Then, remove the black panel located under the car to access the lower screws of the bumper. At this point, disconnect the sensors, taking care not to cut them, and lower the vehicle. Finally, leverage the sides of the bumper to loosen it and remove it. To reinstall, perform the reverse procedure.

Updated on 24 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Removing the Front Bumper on a Mazda 3
Removing the Front Bumper on a Mazda 3
Mazda 3 (2003-2009 / BK, MK 1) Is the front bumper of your Mazda 3 damaged? Let's see how to remove it. Lift the bonnet and secure it, then raise the car on a jack; unscrew the fas…
Instructions for Removing the Front Headlamp
Instructions for Removing the Front Headlamp
Mazda 3 (2009-2013 / MK 2, BL) To remove the front headlamp, you first need to take off the front bumper: start by opening the bonnet and removing the clips on the slam panel. Then…
How to Remove the Front Bumper on a Mazda 3
How to Remove the Front Bumper on a Mazda 3
Mazda 3 (2009-2013 / MK 2, BL) Want to remove the front bumper on a Mazda 3 to replace or repair it? This guide will show you how to proceed through the various stages of disassemb…

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos