Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mazda
    3. :
  3. 3
    4. : Mazda 3 battery replacement

Mazda 3 - Video tutorial

Model: Mazda 3 MK 3, BN, BM - Years 2013-2019
Part: Battery
Operation: Mazda 3 battery replacement

Today we will see, in this video tutorial, how to disassemble and replace the Mazda 3 engine battery, in simple and quick steps. First of all we open the bonnet, pulling the lever from the inside, and we begin to unscrew the nuts of the battery terminals (positive and negative pole), using a 10 mm wrench; after which we unscrew the two fixing nuts that we find on the central bracket of the battery, in order to lift and remove it, as shown in the video. At this point we replace the battery with the new one, of the right type; we just have to make the electrical connections!


Posted on 21 April 2024 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos